How To Install A Single Drawer Dishwasher

Installation Method

Last updated
Save as PDF

Now choose which installation method (A) OR (B) is more suitable for your cabinetry...

Recommended Method (a) - Secure without Drawer Removal (Frameless Cabinetry Only)

1-A. Attach Side Mounting Brackets

Clip all four side mounting brackets into their slots using a flat-bladed screwdriver. Ensure they're securely fitted before sliding product into cavity.

The mounting slots are in pairs, one on each side diagonally across the product. A bracket must match A slot and B bracket must match B slot.

2-A. Integrated models with remote only - Attach venting hose

Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.

3-A. Pull through hoses & move into the cavity

As you push product in, pull through hoses and cord, ensuring they don't get kinked or twisted.

If product cannot be pushed in far enough, pull out again and rearrange hoses and cord. Do not use excessive force, as doing so may squash the hoses and lead to incorrect operation.

4-A. Secure the drawer

5-A. Integrated models with remote only - Secure the external vent

After routing the vent hose through and out the hole cutout, attach and secure the vent by tightening the four screws provided.

Alternative method (b) - Secure by drawer removal

1-B. Integrated models with remote only - Attach venting hose

Check that the fitted elbow is rotated left or right (depending on the direction of the routing), then ensure the venting hose is securely attached to it.

2-B. Pull through hoses & move into the cavity

As you push product in, pull through hoses and cord, ensuring they don't get kinked or twisted.

If product cannot be pushed in far enough, pull out again and rearrange hoses and cord. Do not use excessive force, as doing so may squash the hoses and lead to incorrect operation.